diaperdandy.net

Home Generator Installation Ogden Methods

by

Eric French

Once homeowner has selected the generator, decide how it is to be used. There are two different home generator installation Ogden methods of using a generator: direct and whole house.

Direct method

With the direct method, the homeowner plugs lamps and appliances directly into the generator sockets. Every generator is equipped with a different set of sockets, so before purchasing, check that the generator has the right plugs for the appliances. All generators offer numerous standard 120- volt AC sockets, but some also provide 240-volt AC, or even 12-volt DC sockets useful for recharging lead-acid batteries. Since generators can only be used outdoors, heavy-duty extension cords are needed to connect the appliances to the generator. The direct method is inherently safe to the home s electrical system. It also requires very minimal setup since there is no hardware to install. A serious drawback of direct generator use, however, is that homeowner can only power equipment that has a standard AC plug. This means that homeowner can t easily power the water heater, house lights, or heat pump all of which can be very important. Direct generator use is also inconvenient for powering several appliances located in different rooms of the house, since each one requires its own extension cord.

Whole House Method

With the whole house home generator installation Ogden method, the generator is connected to the home s electrical system. This allows homeowner to use the wall sockets and lights as he or she normally does today. Using a generator to power the whole house requires that homeowner install a mechanical interlock or transfer switch. This work should only be done by a licensed electrician. Mechanical interlocks and transfer switches are hardware devices that transfer the source from which the home draws electricity, choosing between the power company s lines or the generator. Interlocks and transfer switches both perform the same general function but in very different ways. The simpler of the two mechanisms is the mechanical interlock. An interlock manually switches the home\’s main breaker off anytime homeowner switch the generator s breaker on. The interlock is a custom-fitted piece of metal that mounts inside the existing breaker box. This is the cheapest method to connect the generator to the home s electrical system, requiring only the mechanical linkage (installed inside the panel), a generator breaker (also installed inside the panel), and a power inlet box (installed outside where homeowner wish to plug in the generator). Mechanical interlocks have the advantage of allowing homeowner to power up any of the home s appliances using the existing secondary breakers.

The Author is conveying information about

home generator installation ogden

and

commercial electrician ogden

. You re probably thinking, everyone says that, so, what s different here. It s the commitment of quality, genuineness, and a guarantee that values your time and interest.

Article Source:

ArticleRich.com